Acoustic Research AWD211 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie Acoustic Research AWD211. Acoustic Research AWD211 12. Wireless 2.1 stereo headphones

ETTING

Setting Up the Transmitter

The 2.4GHz digital wireless transmitter works with a wide variety of

audio sources, from portable MP3 players to A/V receivers to DVD

players or gaming systems. The way you set it up depends on the kind

of output you want to use on your audio source.

To connect the transmitter to your audio source:

1. Before you start, unplug the transmitter.

2. Plug the white and red connectors of

the stereo audio cable included into

the red and white AUDIO IN jacks

on the back of the transmitter. Make

sure you match the red connector

to the red jack and the white to the

white.

3. Plug the other end of the stereo

audio cable into the audio output or

headphone jack on your MP3 player

or other audio device.

4. Plug the transmitter back in.

Note: High-output sources, such as DVD players or audio receivers/

ampliﬁ ers, may cause distortion if used at full volume with the

transmitter. Try setting them at 1/2 or 2/3 volume.

If your audio source has stereo RCA outputs:

Connect the red and white plugs of the included

stereo (R/L) RCA jack adapter to the audio

source's line out jacks. Then plug the 3.5mm jack

of the included stereo audio cable into the adapter,

and connect the stereo cable to the transmitter.

TARTED

PAIR

R AUDIO IN L

Transmitter (back panel)

DC IN 6V