Alto SB Tandem Marathon Manuale di istruzioni per l'uso - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Aspirapolvere Alto SB Tandem Marathon. Alto SB Tandem Marathon 17. Self service vacuum cleaner
Anche per Alto SB Tandem Marathon: Manuale di istruzioni per l'uso (12 pagine), Manuale d'uso (polacco) (12 pagine)
Stampa la pagina
READ THE OPERATING
INSTRUCTIONS AND
OBSERVE THE SAFETY
NOTES!
INTENDED USE
The SB Station is a self-
service vacuum cleaner
suitable for picking up dry,
non-flammable dusts
normally encountered
when cleaning the inside
of motor vehicles. Liquids
and health-endangering
dusts must not be picked
up.
DESCRIPTION
(FIG. 1)
1 Hose retractor
2 Coin verifier
3 Suction hose fitting
4 Crevice nozzle
5 Suction unit
6 Dirt tank
7 Main switch
8 Adapter ring
9 Lock for coin verifier
slot
10 Distance basket
11 Cloth insert filter
SETTING UP THE
STATION
•
Release the SB Station
from the pallet.
NOTE!
Do not throw the
packaging carton
away. The drilling
8
pattern for mounting
the SB Station is
printed on the carton.
(Fig. 2)
•
Open the door.
•
Take the suction hoses
out of the housing.
•
Lift the suction unit
with the brackets and
secure in place.
(Fig. 3).
•
Take out the dirt tank
and the accessories in
the tank.
•
Mount the SB Station
in the intended
position using the
installation materials
supplied.
NOTE!
Ensure that the SB
Station is mounted on
flat, level ground.
If necessary:
•
Level using shims!
•
Check that the door
opens and closes
easily!
Have the electrical
connection made by a
qualified electrician:
•
Lay the lead (above 15
m, use lead with 2.5
mm² cross-section)
along the bottom of
the SB Station. Lay the
lead into the terminal
box and connect as
shown in the circuit
diagram.
FITTING THE
SUCTION HOSES
SB Station and
SB Sation Marathon:
•
Insert the suction hose
from the outside
through the hose
opening (approx. 80
cm, measured from
the inner edge of the
hose opening to the
end of the suction
hose).
(Fig. 4)
SB Tandem and
SB Tandem Marathon:
First fit the suction hose
for cleaner A (Fig. 5).
•
Insert the suction hose
from the outside
through the hose
opening. For
- Cleaner A approx.
80 cm
- Cleaner B approx.
80 cm
measured from the
inner edge of the hose
opening to the end of
the suction hose.
(Fig. 4)