Alto AltoDrive2.3 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Crossover Alto AltoDrive2.3. Alto AltoDrive2.3 20. Crossover digitale 2 way stereo digital x over
Anche per Alto AltoDrive2.3: Manuale d'uso (19 pagine)

Stampa la pagina

1. Password

4.2 Operational Overview

At system startup the following splash screens will be shown on the graphic display.

The

LTO DRIVE2.3 is booting and initializing its hardware and software, loading the last used preset and the

user interface. The process lasts a few seconds, afterwards the system goes to the Utility Menu (Utility Led is ON).

4.2.1 UTILITY MENU

The Utility menu is accessed by means of the Utility key (Utility Led is ON). The display shows as flowing figure:

a. Load Preset

With this function it's possible to load one of the 65 available preset.

In this window the user can read the name, number and type of the currently loaded preset. 1/1 indicates the

number of page; when it's selected it is possible to get back to the main menu pressing the Esc key. With the

Up/Down key it's possible to select the preset or page number fields, selection is high lighted printing the item

in reverse color.

To load a preset it is necessary to select the preset item; using the dial it is possible to choose the desired preset,

to be confirmed pressing the Enter key.

If the user tries to load an empty preset, an error message (NO LOADING) is shown for some seconds. To go

back to main menu, select page number, then press Esc.

b. Store Preset

With this function it's possible to store preset data into one of the 64 user available presets.

In this window the user can read the number of the location in which to save the current preset data. With the

Up/Down key it's possible to select the preset or page number fields, selection is high lighted printing the item

in reverse color.

To save a preset it is necessary to select the Preset item; using the dial it is possible to choose the desired preset

number, to be confirmed pressing the Enter key.

After data saving, a character string (preset name) will be shown to the user for editing (max 8 chars).

Name:

EMPTY

Num:

LTO DRIVE2.3

Version1.0

Wait

Init System