DIVERSIFIED Large Vent 44x12 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Ventilatore DIVERSIFIED Large Vent 44x12. DIVERSIFIED Large Vent 44x12 13. Vent system

8d. Rack and Pinion Installation (Optional)

Install one each Rack Bracket to the Vent

door as shown here with 4 screws. Remove

and discard the outer cord grommet. Place

the bracket directly over the cord hole and

level with the top of the Vent. It is very

important to place the bracket correctly as

shown. Do Not over tighten the screws.

Slide one Pinion per Vent over the Torque

Tube. Insert the Rack into the Pinion and

secure with bolt and nut to the Vent

attaching bracket as shown.

With the Vent fully open, mark the position

of the pinion on to the Torque Tube.

Next, lift the Vent to the fully closed

position. While ensuring the Pinion is the

correct position by referencing your mark,

tighten the Pinion down to the Torque Tube

by turning 2 each Set Screws. A 4mm Allen

Wrench will be required.

Reference Step 8 for final system setup and

switch positions for the di Drive unit.