Acoustic Research AW822 Manuale di installazione e funzionamento - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Sistema di altoparlanti Acoustic Research AW822. Acoustic Research AW822 13. Wireless indoor/outdoor speaker with auto-tuning

Stampa la pagina

1. Connecting the Speaker System

Warning: This product is designed to work with line level outputs or headphone outputs

only. DO NOT connect it directly to speaker outputs as it will permanently damage the

transmitter.

Powering the Speaker

There are two options to power your wireless speaker: using the included AC

power adapter or using 8 C-cell batteries (not included).

AC Power Adapters

Speaker

AC Power

adapter

3. Plug the other end of the speaker AC power adapter into any standard 120V AC

wall outlet.

Note: Be sure to use the speaker AC power adapter rated 18V DC 700 mA.

Warning: This product is water-resistant, not waterproof. To avoid electrical shock,

it should used with caution near water sources if powered with the AC adapter. Never

submerge in water.

C-cell Batteries

1. Turn the speaker volume down by rotating the ON/OFF/TUNING/VOL.

control on the side of the speaker all the way to the left.

2. Remove the battery compartment cover on the bottom of the speaker.

3. Insert eight (8) C-cell batteries (not included) into the speaker following the

polarity ("+" and "-") as diagrammed inside the battery compartment.

4. Replace the battery compartment cover on the back of the speaker.

Note: Place the rubber cap in the speaker power input jack when using batteries.

Important: If you are using rechargeable batteries NiMH or NiCd, the batteries will

charge when the speaker is powered with the AC power adapter. DO NOT power the

speaker with the AC power adapter if you installed alkaline or other non-rechargeable

batteries – this could cause the batteries to leak, which would damage the speaker.

DO NOT mix batteries with different chemistry types (for example, a zinc battery with an

alkaline battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in

the product when not in use for long periods. Always remove old, weak or worn-out batteries

promptly and recycle or dispose of them in accordance with local and national regulations.

1. Turn the speaker volume down by rotating

the ON/OFF/TUNING/VOL. control on

the side of the speaker all the way to the left.

2. Insert the small, round plug from the

speaker AC power adapter into the speaker

120 V AC

power input jack.

Wall Outlet