3Doodler Flow Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Stampanti 3D 3Doodler Flow. 3Doodler Flow 9.

Stampa la pagina

STEP 6:

Power Down

SECTION 3: TROUBLESHOOTING

Included Tool

Before showing you how to

troubleshoot issues with your

3Doodler Flow, we want to

introduce you a handy tool

included in the box:

11/2023

NOTE:

Plastic that is shorter than 4.3 inches cannot be reversed. You should feed it all the way

through your 3Doodler Flow and use it up. Or you can push the plastic out the back of

the pen using your unblocking tool - See

Unplug it from the power source

and allow your pen to cool

completely before storing.

TAKE A BREAK:

We recommend powering down and giving your 3Doodler Flow a 30 minutes

break after every 2 hours of continuous use.

Mini Spanner

Used for tightening and

removing the nozzle.

Only remove the nozzle

when the pen is on and hot.

Do not over tighten the

nozzle, as you may break it.

With those introductions over, let's look at some different

issues that could arise with your 3Doodler Flow and steps to

get back to Doodling.

SECTION 2: GETTING STARTED

4.3

inches

Section 3, Step

Note:

After 5 minutes of

inactivity, the 3Doodler Flow

heating system will automatically

power down. You will need to

press either speed button OR

unplug it and plug it back in to

continue use.

Unblocking Tool

Used to help push plastic

out the back of the pen for

unblocking purposes out of

the back of the pen.

3B.)