Alto Professional TrueMix 600 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Mixer musicale Alto Professional TrueMix 600. Alto Professional TrueMix 600 20.

(3.0) FEATURES

20. 2TK/USB Outputs: You may connect these

outputs to the inputs of an external recording

device using a standard stereo RCA cable (sold

separately).

21. 2TK/USB In Volume: Turn this knob to adjust the

volume of your 2TK/USB Input signal.

22. 2TK/USB To Main Out: Press this button to send

the 2TK/USB Input signal through the Main

Outputs.

23. Power/Phantom LEDs: The Power LED will

illuminate when the mixer is powered on. The

Phantom LED will illuminate when the Phantom

Power Switch is in the ON position.

24. Phantom Power Switch: Set this switch to the ON

position to send 48 Volts of phantom power to

the Mic Inputs.

Note: Most dynamic microphones do not require phantom power, while most

condenser microphones do. Please use caution and consult your microphone's

documentation to find out if it requires phantom power before connecting your

microphone to the Mic

Misapplication of this function can damage certain types of microphones, such

as ribbon microphones. Always connect the microphone FIRST, then turn on

phantom power.

25. Output Level LED Meters: These LEDs display the audio level of the Main

Output. Turn the Main Out Volume down if the Clip LED at the top of the meter

lights up excessively.

26. Bluetooth Pairing Button: Press and hold this button to activate Bluetooth

pairing mode to connect a Bluetooth device with TrueMix 600. See the section

(4.2) Operation > Connecting a Bluetooth Device

27. Bluetooth Volume: Turn this knob to adjust the volume of the Bluetooth signal

being sent to the Main Output.

28. Main Out Volume: Turn this knob to adjust the volume of the Main Output.

Inputs and attempting to use this function.

for further instructions.