AkitikA PAT5RCA Manuale di installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione per Amplificatore AkitikA PAT5RCA. AkitikA PAT5RCA 12. Dynaco pat-5 preamp replacement rca jack
Stampa la paginaSection 2: Kit Building Hints
Yes, I know you want to ignore this section and jump right into building the kit.
However, please take a minute and read the advice. I've condensed it into bullets so that
even you guys who are in a hurry can benefit.
Stop any time you're feeling confused, tired, or anxious. Taking breaks at those
strategic times will keep the build enjoyable and greatly enhance your chances of
first-time success.
A soup bowl is your friend. Before you build, carefully empty the parts for just
that board into a broad, flat, light colored soup bowl. That makes it easy to find
the parts, and keeps them from getting lost.
Is something in this manual confusing? Does something look wrong? Send your
questions by email to
help yourself and everyone who builds the kit.
Overview of the Process
The project consists of the following steps:
1. Building the new RCA jack fields and adding ground wires.
2. Opening up the PAT-5.
3. Transferring two capacitors and all the wires from the old jacks to the new jacks.
4. Reinstalling the new RCA jacks.
5. Closing up the PAT-5.
Section 3: Building the New Jack Fields
Drilling the Mounting Holes
Each of the jack fields has four mounting holes. To use them in the PAT-5, you should
drill these holes out using a 5/32" drill. This will make fastening the jack fields into the
PAT-5 much easier.
The following drawing shows how all the jacks are assembled onto the jack fields.
Figure 1-Assembling RCA jacks to the mounting PCB's
Right and Left Channels
Each kit is supplied with 24 RCA jacks:
12 red-insulator RCA jacks for the right channel
12 white-insulator RCA jacks for the left channel.
or
dan@updatemydynac
Page 5 of 12
o.com. You'll