Balt 27534 Manuale di istruzioni per il montaggio - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Cremagliere e cavalletti Balt 27534. Balt 27534 13. Adjustable height sound powered lectern

Stampa la pagina

#2# 27534

26. Attach the Large section of Upper Slide (L) to each side of the Upper Lectern Assembly using

three Upper Slide Screws-Small (N) in the predrilled holes as shown in Illustration # 18.

Move the center section of Upper Slide (L) to a point that the third mount hole is exposed

through both sections and then attach the third screw.

Illustration # 18

Upper

Assembly

Third Screw

Illustration # 19

Third Screw

Lower

Assembly

27. Attach the Small section of Upper Slide (L)

to each side of the Lower Lectern Assembly

using three Upper Slide Screws-Small (N) and

one Upper Slide Screw-Large (M) in the pre-

drilled holes as shown in Illustration # 19.

Move the center section of Upper Slide (L) to

a point that the third mount hole is exposed

through both sections.

28. Lower the Upper Lectern Assembly down

P-21

into the Lower Lectern Assembly until it rests

on the Top Cylinder Control (P-21). Line up

the holes and attach using four Allen Bolts (J)

and four Flat Washers (K) . Use Allen Wrench

(O) to tighten Allen Bolts into threaded inserts

in the bottom of Top Bottom Shelf (P-11B).

Feed the speaker wires up through the rear

P-11B

hole in each shelf and to the back of the Amp

Speaker

Wires

(P-16).