Balt 27689 Manuale di istruzioni per il montaggio - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Caricabatterie Balt 27689. Balt 27689 10. Economy tablet charging cart

Place the Back Panel assemblies from Step 5 and Step 6 in between the Right and Left Side

assemblies as shown in illustration #6. Make sure the Wood Dowels of the assemblies are insert

into the predrilled holes in the bottom of the Top Panel (P-1). Secure the Back assemblies to

each Side Panel assembly using three Screws (C). Tighten Screws with Allen Wrench (G). At-

tach the Magnet (T) to the bottom of the Top Panel (P-1) using two Magnet Screws (U) into the

predrilled holes so the Rear Door (P-6) stops against the Magnet. See Detail 7A.

To attach the Bottom Panel (P-2) to the assembly from Step 7, line up the Wood Dowels in the Back

assemblies with the predrilled holes in the Bottom Panel (P-2). Attach the Bottom Panel (P-2) to

the Side assemblies using four Screws (B) as shown in illustration #7. Tighten Screws with Allen

Wrench (G).

Illustration #7

Detail 7A

P-11

Illustration #6

P-2

P-6

P-12

P-1