Balteco VARIO Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Cabine doccia Balteco VARIO. Balteco VARIO 17.

VARIO ENG

1. IMPORTANT SAFETY

• CAUTION: Never allow children to use the bath/shower cabin without adult supervi-

sion to avoid accidents.

• CAUTION: Physically challenged people must exercise extreme caution and/or use

assistance if necessary when using bath/shower cabin.

• CAUTION: Do not use external electrical devices while taking a bath or shower. De-

vices located at the bath's vicinity, being connected into electricity network, must be

fastened in such a way as to avoid their accidental falling.

• CAUTION: Upon failure/damage or abnormal functioning of any appliances of the

bath/shower cabin a technical maintenance professional must be called. Use of dam-

aged product or product with failure of any type is strictly forbidden.

• Before using the bath, check the water temperature in the bath. Suitable is water

temperatures up to 40ºC. Pouring over 60ºC water into the bath/shower cabin may

damage the material.

• Do not use the bath/shower cabin when being intoxicated with alcohol or drugs.

• Take care when entering or leaving the bath/shower cabin to avoid injuries.

• Consult your physician before using the bath when you're pregnant or suspect preg-

nancy.

• Consult your physician before using the bath when being sick.

• All the openings of the bath/shower cabin must be clean and unobstructed.

To switch the display on, press on/off button A. For a moment the display will indicate

time, temperature and all the icons of currently inactive functions (chromo/light B,

steam D, radio C, hydromassage F, and setup).

To deactivate all functions, pressing on/off button A again, display enters into standby

mode. The clock reading after connecting the product to the power network is 00:00.

In order to adjust the clock reading (00:00), you need to set the time (see Section

2.6.). In case of power failure the clock reading will reset to 00:00 (unless the power

failure lasts less than 5 minutes).

All functions become inactive and the display will enter into stand-by mode (only the

indicator of errant time is lit on the display) 60 minutes after pressing any button or 20

minutes after deactivating the last function. If the product is connected to the power

network, the control panel will show the so-called errant time.

All functions can be activated after pressing button A to switch on the steam sauna.

In order to switch a function on:

1) use a quick button,

2) use buttons X/Y to select the icon of deactivated function and press OK button.