Balteco VARIO Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Cabine doccia Balteco VARIO. Balteco VARIO 17.

VARIO ENG

button RADIO (a long press) = BT audio off, BT icon displayed

button RIGHT = sound volume increases

button RIGHT (a long press) = next track

button LEFT = sound volume decreases

button LEFT (a long press) = previous track

You can accept an incoming call (intermittent tone and the text

CALL flashing on the screen) by pressing the OK button; you can

reject a call by pressing the button ESCAPE / SCOTTISH SHOW-

ER. You can adjust the volume with LEFT / RIGHT button.

2.3. STEAM

Quick button on control panel.

Press button D to switch this function on/off. When pressing button

D (to switch the function on), the display will show active icon of

the steam function, the LED indicator next to the button will light up

and the cursor will move to the activated icon and the temperature

reading will start to blink. Blinking reading will indicate preselected

temperature. Blinking will continue for 10 seconds after switching

the function on. Then the reading will start to show current tem-

perature.

Press button D again to switch off steam function. The steam func-

tion icon will be deactivated and the LED indicator next to the button

will turn off.

Temperature setup

Temperature can only be adjusted if the function is switched on.

Use X/Y buttons to select activated steam function icon shown on

the display, and press OK button, "steam function" submenu will be

shown on the display. See the picture.

In order to set the steam temperature, use buttons X/Y to select

the temperature reading and then use left/right buttons to adjust

the reading. Press 'left' button to reduce the temperature (min

35°C) and press 'right' button to increase (max 50° C). Press OK

button to save the selected temperature. Display will stop showing

"steam function" submenu if you:

- have not pressed any of the buttons within 20 seconds,

- use buttons X /Y to select exit setup icon and press OK button,

- press button D, i.e. deactivate the function,