esera 11131 Manuale d'uso
Sfoglia online o scarica il pdf Manuale d'uso per Accessories esera 11131. esera 11131 4. Temperature sensor flush-mounted for 1-wire bus system
Stampa la pagina
Art. No. 11131
highly accurate Temperature Sensor
suitable for all 55mm switch ranges,
e.g. Berker, Jung and others
connection via screwless pressure clamps
simple power supply (5V)
integrated voltage monitoring
simple mounting in 55mm flush boxes
covers available for Berker switch range
Application:
Heating control (individual room control)
Ventilation system control
1
Introduction
Before you start to install the module and put it into operation, please read this
operating manual carefully to the end, especially the section on safety instructions.
2
Product description
With the 1-Wire Temperature Sensor UP Berker a simple monitoring of the room temperature is possible
It is intended for all switch ranges of the manufacturer Berker,
with adapter frame also for many other manufacturers,
such as Jung, Merten etc. An accurate temperature sensor
is an important actual value transmitter for all types of
radiator and heating control systems.
In combination with a 1-wire digital switch module,
a very effective and energy-saving heating control system
(individual room control) is possible. A calibration of the
sensors is not necessary.
They can be put into operation immediately without waiting time.
The sensor module is equipped with screw connections and can be
operated in a 1-wire system with three wires
(ground, 5V and data) or in parasitic mode.
Each temperature sensor has an individual serial number. The
temperature sensor (DS18B20) has a high resolution of 12Bit
(0.06°C). The temperature sensor DS18B20 can be operated in
"parasitic mode".
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
User Guide
Temperature Sensor flush-mounted
for 1-Wire Bus system
11131 V2.0 R1.0 Manual
Note: Cover not part of the article
Page 1 of 4