3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Stampanti 3D 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit. 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit 20.

Stampa la pagina

Everything You Wanted to Know About Screwing But

Were Afraid to Ask

Screw

Tool Needed

30-50mm

Hex Cap

3mm Hex Wrench

Head

12mm Hex

3mm Hex Wrench

Cap Head

16mm Hex

3mm Hex Wrench

Cap Head

#6 3/4" Wood

Philips Head

Screw

Screwdriver

Probably the most confusing thing about assembling this enclosure will be which fastener or

screw to use. Luckily it's pretty easy to ﬁgure out once you know the system. While the exact

screw to use will be detailed in each section of the manual, you probably won't need to refer to

it once you know the secrets.

The most common screw is the 12mm hex cap head screws. The 12mm screws are long

enough to attach things to the acrylic front, top, sides and back.

Each section will describe exactly which screw to use, to read carefully and use the speciﬁed

screw for the best results.

The actual length of the "long" screws to attach the fan and or ﬁlter will vary depending on the

depth of the particular shipment of fans we happen to get that month. They won't be hard to

spot since they'll be the longest thing in the bags.

Note that you'll need a 3mm hex wrench for most of the screws. We don't include one in the

kit since they invariably end up in a drawer or landﬁll. Anyone with a 3D printer should invest in

a nice metric hex wrench set, since there will be many adjustments to be made along the way. 

Usage

Attach fan/ﬁlter, attach large

front latch mounts

Connectors, hinges

Knobs, small latch mounts on

some models

Attach magnetic latch to mount

Relative Size