Division 6 Dual Mini Sequencer Manuale di istruzioni per l'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Sintetizzatore Division 6 Dual Mini Sequencer. Division 6 Dual Mini Sequencer 14.

On (Stays on for entire duration of step and doesn't drop before the next step)

•

On w/ Drop (Stays on for most of step, but drops briefly before the next step)

•

Gate Follow (Timing follows gate timing for the step)

•

When programming a step, each press of the ACC button cycles to the next mode. The ACC LED

will flash to let you know what mode you have set:

On (LED stays on)

•

On w/ Drop (LED flashes once then stays on)

•

Gate Follow (LED flashes twice then stays on)

•

Off (LED turns off)

•

Programming a Song

Each step in a song contains a sequence. To program sequences into song steps, first make

sure the keyboard display is in SONG/SEQUENCE SELECT mode (press OCTAVE UP and OCTAVE

DOWN at the same time if it's not). Press one of the black keys to select the song you want to

work on.

Press PROG/RESET until the STEP LED is steady; you are now in program mode.

Press the white key that corresponds to the sequence you want to store in the current song

step. The white key LED corresponding to the selected step will light.

Press the STEP UP to advance to the next song step (or STEP DOWN to go back) and select the

desired sequence for that step. Continue to program sequences into steps until they're all

programmed.

If you don't want to use all 16 steps in your song, you can use the LOOP button to make the

step after the end of your song a LOOP step. For example, if you only want 4 sequences to play

in your song, program a LOOP into step 5. When running, the sequencer will bounce off of step

5 and loop back to the first step of the sequence programmed into the first step of your song.

Copying a Song or Sequence

When programming songs or sequences, sometimes you might want to copy an existing one so

you can modify it instead of starting over from scratch for each one. To do this, first make sure

the keyboard display is in SONG/SEQUENCE SELECT mode. Press and hold the song or

sequence you want to copy from, then press and hold the song or sequence you want to copy