3DUpFitters Prusa i3 MK3S Manuale di installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione per Involucro 3DUpFitters Prusa i3 MK3S. 3DUpFitters Prusa i3 MK3S 18. Enclosure kit
Anche per 3DUpFitters Prusa i3 MK3S: Manuale di installazione (11 pagine)

Stampa la pagina
Assemble Panels
1. The Front Door
Each of the corners on the enclosure will be held together by the connectors pictured
below. There are only two versions L and R, which can be identified by the letters
stamped on the inside. The diagonally opposite connectors are identical, i.e. Bottom
Right is the same as Top Left. In all cases the surface of the connector with the cutout
pattern faces front or back. Note the two pictures below show the inside of the front
panel.
If the holes don't seem to line up please check out this video!
https://www.3dupfitters.com/blogs/news/how-to-attach-corner-connectors
Top Left (L)
Bottom Left (Labeled R)
R-Connector From Inside
Copyright 2020 3DUPfitters LLC
Top Right (R)
Bottom Right (Labeled L)
6