ESI ePhone4x Istruzioni - Pagina 12

Sfoglia online o scarica il pdf Istruzioni per Telefono ESI ePhone4x. ESI ePhone4x 19. Button programming
Anche per ESI ePhone4x: Quide di avvio rapido (2 pagine)

Stampa la pagina
ESI ePhone4x Istruzioni
•
If you need to pull the call back from the transfer press the line key associated with the call. This must be done
before x6501 answers.
•
If I attempt to perform the transfer and x6501's LED is red the call will either ring x6501 as call waiting call or
go to their voicemail if they are in DND.
•
This is the basic description of the Supervised Transfer feature using the DSS/BLF Key as we have it
programmed. Also if the button Subtype is set as: BLF/New Call, it too will function in much this same way.
There are alternatives to the BLF example above. With most of the Subtypes that provide Busy Indication (BLF/XXX as
well as the Presence Indication), pressing the button from idle will initiate a call to that extension. However it's when
the phone is on an active call that the functionality of the various subtypes comes into play.
When the button is programmed as
•
BLF/BXFER it will perform a blind transfer of the active call to the programmed extension.
•
BLF/CONF it will initiate a conference call to the programmed extension that connects as soon as they answer.
(There is no delay time to announce the call; you are immediately connected in a conference.)
•
BLF/DTMF – unless noted otherwise this subtype is not used.
Page 12 of 19
0455-0209 Rev C