Acoustic Signature TA-1000 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di registrazione Acoustic Signature TA-1000. Acoustic Signature TA-1000 8.

6.5 Adjusting the cartridge

If you have to change the position of the diamond tip you can uns-

crew the screw on the top of the tonearm`s headshell and move

the cartridge into the corresponding position.

Please make also sure that the leading edge of the cartridge is

parallel to the marker lines of the cartridge alignment gauge and

Not OK

the needle is exactly in the reference point. If not correct it by

moving forward and backward and changing the angle.

Fix the right position through looking the headshell screw on the

top.

7. Longitudinal balance

Position the arm so that it is clear of the armrest and the cartridge

is clear of the turntable. Move the lift into the low position. Balance

the arm by rotating the weight to move it backwards or forward as

required to make the arm float around his zero point.

The tracking force weight has 3 screws around his circle to fix the

position. Make sure to tighten the screws only vers very soft.

8. Vertikal tracking force (cartridge)

The screws can be used as scale to adjust the weight.

Every 360 degree turn of the weight adds 0.25gramm to the

cartridge. So if you need 1.5 gr. for example find the zero floating

position of the arm and then do 6 full roundturns to get the 1.5gr.

tracking force.

Acoustic-Signature

Made by AS-Distribution GmbH

Hillenbrand Straße 10

D-73079 Süssen

Tel: +49 7162 9474450

Fax: +49 7162 9474459

www.acoustic-signature.com