ESI ESRTERFW Manuale di istruzioni per l'installazione - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Termostato ESI ESRTERFW. ESI ESRTERFW 16. Wireless digital room thermostat
Anche per ESI ESRTERFW: Istruzioni per l'utente (8 pagine)
Stampa la pagina
- 1. Room Thermostat
- 1. Installation Instructions
- 2. Table of Contents
- 2. Technical Data
- 2. Installation Safety Instructions
- 2. Maintenance
- 2. Safety Notice
- 2. Fitting the Room Thermostat
- 2. Fitting the Receiver
- 2. Commissioning/Configuring
- 2. Wiring Diagram
- 2. DIP Switch Settings - Heating
- 2. Heating Mode
- 2. Receiver Manual Override
Safety Notice
WARNING!
Always isolate the AC mains supply before installing.
this product must be fitted by a qualified person, and
installation must comply with the guidance provided in
the current editions of BS767 (IEE wiring regulations)
and part "P" of the building regulations.
Fitting the Room Thermostat
The ideal position to locate the Programmable Room
Thermostat is about 1.5m above floor level, in a location
where the thermostat is accessible, reasonably lit and free
from extremes of temperature and draughts. Do not position
the thermostat near sources of heat, such as radiators lights,
TV, direct sunlight or on an outside wall.
1.5m
Installation
1. Loosen the screws on the back-plate and remove from
the Unit.
2. If required, fix the back-plate, terminals at the top,
either direct onto a flat wall using wall plugs and screws
or on a flush mounting single conduit box.
8