Alto-Shaam CS-200 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Attrezzature per alimenti commerciali Alto-Shaam CS-200. Alto-Shaam CS-200 20. Carving station
Anche per Alto-Shaam CS-200: Installazione, funzionamento e manutenzione (20 pagine)

Stampa la pagina

s i t e i N s t A L L A t i O N

d A N G e r

IMPROPER INSTALLATION,

ALTERATION, ADJUSTMENT,

SERVICE, OR MAINTENANCE COULD

RESULT IN SEVERE INJURY, DEATH,

OR CAUSE PROPERTY DAMAGE.

READ THE INSTALLATION,

OPERATING AND MAINTENANCE

INSTRUCTIONS THOROUGHLY

BEFORE INSTALLING OR SERVICING

THIS EQUIPMENT.

c A u t i O N

METAL PARTS OF THIS EQUIPMENT

BECOME EXTREMELY HOT WHEN

IN OPERATION. TO AVOID BURNS,

ALWAYS USE HAND PROTECTION

WHEN OPERATING THIS APPLIANCE.

s i t e i N s t A L L A t i O N

1. The appliance, complete with unattached items

and accessories, may be delivered in one or

more packages. Check to ensure all accessories

ordered have been received.

2. The hot carving station is designed to be

mounted directly on top of a Halo Heat Cook

& Hold oven or holding cabinet. The shelf can

also be used as a free-standing unit.

HEATED CAbinET mounTED sHElvEs:

Remove the 1" legs prior to placing the carving

shelf on top of the Halo Heat cook/hold oven or

holding cabinet. Appliance must be installed on

a stable and level surface.

frEE-sTAnDing sHElvEs:

Ensure that the 1" legs are in place prior to

placing the carving shelf on work surface.

Failure to operate without the 1" legs prior to

heating the shelf could result in damage to the

surface on which the shelf is placed, may pose a

potential fire hazard, and nullifies the validity

of the UL listing mark. Appliance must be

installed on a stable and level surface.

3. Do noT install this appliance in any area where

it may be affected by any adverse conditions

such as steam, grease, dripping water, high

temperatures, or any other severely

adverse conditions.

carving stations

AltoShaam-webshop.nl

i N s t A L L A t i O N

4. Do noT install near a cold air source such

5. This appliance must be kept free and clear of

6. Lift Breath Guard up and slide into place in

A number of adjustments are associated with

initial installation and start-up. Installation and

start-up adjustments are the responsibility of the

dealer or user. These adjustments include but

are not limited to leveling, electrical hook-up and

installation of bulbs.

LeVeLiNG

Level the

appliance from

side-to-side and

front-to-back

with the use of a spirit level.

NOte: Failure to properly level this appliance

•

installation

operation

service manual

c A u t i O N

TO PREVENT PERSONAL INJURY,

USE CAUTION WHEN MOVING OR

LEVELING THIS APPLIANCE.

c A u t i O N

The performance of this unit has

been optimized using the factory

provided bulbs. These bulbs should

be replaced with an exact replacement

or with a factory recommended

replacement. These bulbs have been

treated to resist breakage and must be

replaced with similarly treated bulbs in

order to maintain compliance with NSF

standards. DO NOT over-tighten bulbs

in their receptacles as this can cause

damage to the bulb ﬁ lament.

as a freezer, air conditioning vents, or in any

area where outside air fluctuation can affect

performance.

any obstructions blocking access for

maintenance or service.

brackets found in the front of the appliance.

can cause improper function.

(11/12) -

. 3

AltoShaam-webshop.nl