ClearLink 905 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Radio bidirezionale ClearLink 905. ClearLink 905 10.

Stampa la pagina
Installing The Batteries.
The ClearLink 905 is powered by three AA alkaline batteries. This model can also be powered by an
optional, rechargeable battery pack or by optional, rechargeable AA Nickel Cadmium (NiCad) batteries. See
"Optional Accessories" at the end of this manual for further information.
To access the battery compartment on the back of the radio, slide the compartment cover downward and
remove it. Insert three AA batteries (not supplied) in accordance with the polarity symbols (+ / - )
embossed on the bottom of the compartment, and replace the compartment cover.
The radio is now ready to transmit and receive.
Worth Noting:
•
If the red Low Battery warning indicator illuminates on the LCD screen when the radio is turned on,
it is time to replace the batteries.
•
When replacing the batteries, always replace all three.
"Turning It On."
To turn the radio on, turn the Power ON/OFF button (# 2) in a clockwise
direction. The radio will emit a series of short "startup" tones indicating that it is ready to transmit and
receive.
"Tuning It In."
ClearLink 905.
The ClearLink 905 operates on the 14 Channels Licensed by the FCC for license-free communications. Each
of these channels has 38 associated CTCSS codes.
"Selecting a Channel"
In standard operating mode the "UP"(SCAN) or "DOWN"(ME) buttons will change the channel. Once the
desired channel is selected you are ready to communicate.
"CTCSS or Privacy Codes"
A Continuous Tone Coded Squelch (CTCSS) or privacy code may be used to decrease the interference from
other radios in the same area. There are 38 tones available on each channel to activate:
1.
Press the "CTCSS" button. The "CTCSS" icon will appear on the display and CTCSS code will flash.
2.
Press the "UP" or "DOWN" buttons to select the desired CTCSS code. Press the "PTT" button to
save.
•
A code of "00" means that no code is programmed.
•
You must set CTCSS for each of the channels you want to use CTCSS on.