ESI ALL-FLEX FLEX3-WHT-V1 Manuale di montaggio e funzionamento - Pagina 3
Sfoglia online o scarica il pdf Manuale di montaggio e funzionamento per Arredamento per interni ESI ALL-FLEX FLEX3-WHT-V1. ESI ALL-FLEX FLEX3-WHT-V1 12. 3 leg electric table base
Stampa la pagina
ASSEMBLY
STEP 1
With the work surface facing down on a soft, clean surface, arrange the leg columns and center leg top
supports as shown.
• Unfold the hinged side legs and place them motor-side down at the ends of the work surface.
• Place the center leg motor side down near the 90° or 120° angle of the table.
• The mounting tabs on the leg columns and top supports must be face down so that they are against the
work surface.
Leg Column
with Frame
(Right)
STEP 2
Lock the side leg columns in the upright position.
• Use the 4mm Allen key to install M6x15 hex head
screws into the frame and motor.
Mounting Tabs
ALL-FLEX
3 LEG ELECTRIC TABLE BASE
™
Center Leg
Center Leg
Top Support
(Right)
Center Leg
Top Support
(Left)
Leg Column
with Frame
(Left)
M6x15
4mm
Allen Key
3