ClearMirror BigSexy 16105-306024M Manuale di istruzioni per l'installazione - Pagina 3
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Arredamento per interni ClearMirror BigSexy 16105-306024M. ClearMirror BigSexy 16105-306024M 7. Showerlite led back-lit, fog-free shower mirrors
Stampa la paginaWARNING: This stage requires a qualified electrician and conformance with both the National
Electrical Code and local building codes. Turn off the power to the circuit connected to the light
fixture at the disconnect means. Failure to do so could result in death or serious injury.
Wiring the Heaters
Observe electrical load requirements. Ensure total amperage does not exceed rating of
the wall switch (i.e. 15-amp switch), circuit or existing wiring.
Use minimum 18-gauge wire from transformer to mirror connection.
1. Run power supply wires from the provided low-voltage in-line power supply to the
opening at the mirror location. The power supply wires are run behind the wall.
2. Ensure low-voltage junction box is installed per manufacturer's instructions.
NOTICE: Junction box must be accessible per all applicable safety, local, and national electrical
codes. Access to the junction box is gained by removing the mirror.
Use only supplied LED wiring between the mirror and the outlet. All wiring must be in accordance
with applicable installation code, NFPA 70-2011, National Electric Code.
The direct plug-in power supply must be accessible for service and replacement and must have
some air flow. Do not mount the power supply in a closed wall.
Low Voltage
Junction Box
Wall Studs
Figure 1. Locating the junction box and running wires (front view).
In-line
Transformer