CamOne Infinity Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Fotocamera digitale CamOne Infinity. CamOne Infinity 20.

turn on video & images

Preparation

Compensation for recorded content

CamOne Tec will not be responsible in any case for any consequential or direct problems that

will lead to a loss of recorded or edited data. Furthermore, CamOne Tec will not guarantee the

content in case the recording or saving is not working properly. The above limitations are also

valid in case the unit has been repaired. Do not remove the micro SD Card while recording

or saving. Do not switch off or take out the battery before the recording has been finished or

as long as there is access to the memory, indicated by a rotating circle. Protect the unit from

extreme temperatures. Do not record at temperatures lower than minus 10°C or higher than

50°C. Remove the camera from the windshield/sucking pad in case extreme temperatures

can be expected!

It is known that forged accumulators which remarkably look like the original product are

offered for sale repeatedly. Some of these accumulators are not equipped with a proper

protection circuit which would satisfy the regulations of the prevailing safety regulations.

These accumulators might lead to fires or explosions. We take no liability for accidents,

damages or failures which result from the use of a forged accumulator.

The enclosed battery is not fully charged when being purchased. Please charge the battery

before using the CamOne infinity for the first time!

Connect the camera with your computer using the included USB-cable. The charging process

is indicated by the red LED light which switches to green as soon as charging is finished.

Charging takes about 3 hours. You can alternatively use the 5V USB-Power adaptor (Art.

No.: FCHD43).

1. Push the locker to the front (lens direction)

2. Pull out the battery cover.

3. Remove the cover, below you will find the battery case.

4. Align the battery's contacts with the golden contacts inside the

cam and insert battery.

Only use the original battery (Art-No.: COIN08). Batteries

of other suppliers may have different polarities and cause

damages!