ClearOne INTERACT PRO Specifiche tecniche - Pagina 2
Sfoglia online o scarica il pdf Specifiche tecniche per Sistema di conferenze ClearOne INTERACT PRO. ClearOne INTERACT PRO 2.
Stampa la pagina>
INTERACT PRo REAR PANEl
>
SPECIfICATIoNS
AUDIo PERfoRMANCE
Conditions: Unless otherwise specified, all
measurements are performed with a 20 Hz to
22 kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz BW,
Max Gain
Noise (EIN): -124 dBu, 22 kHz BW, max gain,
Rs=150 Ω
THD+N: <0.02%
Dynamic Range: 100 dB (non A-weighted)
Crosstalk <-91 dB re 17 dBu
Sampling Rate 48 kHz
A/D - D/A Converters 24-Bit
Auto Mixer Parameters
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate
Matrix Mixing Parameters
8 Mic/line analog inputs
2 line inputs
8 line outputs
8 line mic/line in expansion with optional
INTERACT 8i
3 assignable processing blocks in/out
Microphone Input Parameters
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Noise Cancellation on/off
PEQ
Filters
Mute on/off
Chairman Override on/off
AGC on/off
Automatic Level Control on/off
Auto Gate/Manual gate
Adaptive Ambient on/off
Pre-AEC channel
Assignable Processing Blocks
Channels: 3
Filter Nodes: 4 per channel
Filter Types: All Pass, Low Pass, High Pass,
Low Shelving, High Shelving, PEQ, Notch
Compressor: 1 per channel
ClEARoNE loCATIoNS
>
Headquarters:
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel: 801-975-7200
Toll Free: 800-945-7730
Fax: 801-977-0087
© 2010 ClearOne. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice. 802-000-028-01-DS Rev. 2.6. February 2010.
Mic/line Inputs 1-8
Impedance: 5 Kohm per leg or 10 KOhm
Balanced
Maximum Level: -65 dBu to +17 dBu
Echo Cancellation: 128 ms tail time (works with
12 dB of room gain)
Phantom Power: 24 Vdc at 10 ma
line Inputs 9-10
Impedance: 5 Kohm per leg or 10 KOhm
Balanced
Maximum Level: 17 dBu
line outputs 1-8
Impedance: 50 Ohm per leg
Nominal Level: 0 dBu
Maximum Level: 17dBu
Telephone Interface
Telephone Audio Performance
Conditions: Unless otherwise specified, all
measurements are performed with Transmit
Limiter and Receive ALC disabled
Frequency Response: 250 Hz to 3.3 kHz ±1dB
THD+N: <0.3% re-max level 250 Hz to 3.3 kHz
SNR: > 62 dB re-max level
Telco Line Echo Cancellation
Tail Time: 32 ms
Null: 55 dB nominal
Telephone Noise Cancellation
Noise Cancellation 6-15 dB attenuation
RS-232 Control Port
DB9 female
9,600/19,200/38,400/57,600
(default)/115,200
Baud Rate: 38,400, 56,700(default) 115,200
Protocol: 8-bit,1 stop, no parity
Hardware flow control on (default)/off
USB Configuration Port
USB 1.1 Compatible
Type: B Connector
lAN
10/100 Ethernet
RJ-45 with activity LED
Supports: Telnet, HTTP
Expansion Bus In/out
Cable:
Cat 5 Twisted Pair, Solid Conductor
Maximum Cable Length:
Between INTERACT Pro and INTERACT Pro 8I:
80 feet
Between INTERACT Pro/Pro 8i and INTERACT
COM: 60 feet
Configuration Software
INTERACT Supports: Microsoft XP , Vista, and
Windows 7
Latin America
Tel: 801-974-3621
INTERACT CoM and INTERACT W-CoM
(oPTIoNAl)
versions:
Wired or Wireless (2.4 GHZ)
USB Audio Channel:
USB 2.0 Compatible
Connector: Mini Type B
TX and RX Channel, 16-bit at 16 kHz
Headset Audio Channel:
Connector: RJ-9
Supported Telephone Sets: Most Cisco,
Avaya, and Nortel phones
Audio Performance
Frequency Response: 40 to 3300 HZ
THDandNoise: <.04% re-max level
with 0 dB gain@1 kHz
Dynamic Range: >84 dB (non A-weighted)
Audio Processing:
Receive Automatic Level Control
Line Echo Cancellation for side-tone
elimination
GPIo:
Pin 1: Global Mute (C)
Pin 2: Global Mute (S)
Pin 3: ON/OFF Hook (C)
Pin 4: ON/OFF Hook (S)
Pin 5: 5V dc up to 40 milliamps
INTERACT DIAlER (oPTIoNAl)
Available in Wired or Wireless versions
Functions: Dialing, Volume Control, Mute
Control
Communications:
Wired Version: RS-232 connected to mixer
Wireless Version: 2.4 GHZ DSSS to Interact
COM Wireless
Power Supply
Primary Voltage: 100 to 240 VAC
Auto-Sensing, 50-60 Hz
Power Consumption: 26 W Maximum
Dimensions (W x D x H)
INTERACT PRO: 17" x 7.5" x 2"
(43.2 cm x 19.1 cm x 5.1 cm)
INTERACT COM: 4.7" x 5.6" x 1.7"
(11.9 cm x 14.3 cm x 4.4 cm)
Weight
INTERACT PRO: 4.5 lb. (2 kg)
INTERACT DIALER: 2.0 lb. (.9 kg)
INTERACT COM: 1.51 Lb (7 kg)
EMEA
Tel: 44 (0) 1189 036 053
INTERACT PRO
Compliance
ROHS Compliant
WEEE Compliant
UL Safety Listed
AES48-2005 AES Standard on Grounding and
EMC Practice
optional Accessories
INTERACT – COM
910-154-030
INTERACT COM-W (For Wireless Dialer)
910-154-050
INTERACT Dialer
910-154-035
INTERACT Dialer - Wireless
910-154-040
INTERACT Pro 8i Input Expander
910-154-065
Part Number
910-154-055
APAC
Tel: 801-303-3388
DATA SHEET <