Akiyama CDJ-MP32 Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Lettore CD Akiyama CDJ-MP32. Akiyama CDJ-MP32 16. Professional

Stampa la pagina

PART NAMES AND FUNCTIONS

MAIN UNIT

21. DRIVE 2 TRANSPORT TRAY

compact disc into the drive 2 mechanism. The tray is opened and closed by

pressing the DRIVE 2 OPEN/CLOSE BUTTON. Never attempt to force the

transport tray open or closed when the power is turned off.

(Transport Tray Open/Close) - This button is

22. DRIVE 2 OPEN/CLOSE

used to open and close the drive 2 transport tray. NOTE: When a disc is already

loaded in the transport tray, the tray will not open unless the unit is in pause or

cue mode.

23. DRIVE 1 TRANSPORT TRAY

compact disc into the drive 1 mechanism. The tray is opened and closed by

REAR PANEL

- Connect the supplied 8 pin cable from this jack to

26. REMOTE JACK

the remote control's connector. This will allow you to control the player

functions with the remote unit.

- This is the main power connection. Only

27. POWER CONNECTOR

use the supplied polarized power cord. Use of any other power may result

in sever damage to the unit. Be sure the local power matches the unit's

required power.

- This jack sends a digital stereo out signal.

28. DRIVE 1 DIGITAL OUT

Use this connection to create near perfect copies of your disc to a Mini

disc, CD-R, or any other recording device with a digital input.

29. DRIVE 1 AUDIO OUT R & L

LCD DISPLAY

(32)-(35)Track, Minute, Second and Frame Displays

indicate information for the CD's current position and time.

- These ten indicators provide a visual display of the

(36)BAR Indicator

approximate position of the pickup within the current track.

- This indicates the unit is in single play mode,

(37)SINGLE Indicator

the unit will play a single and return to CUE mode. If the single indicator

isn't displayed the unit is in continuous mode. In continuous mode the

drive will play through all the tracks on the disc.

- This tray is used to load and unload a

– These jacks send a left and right

- These displays

pressing the DRIVE 1 OPEN/CLOSE BUTTON. Never attempt to force the

transport tray open or closed when the power is turned off.

24. DRIVE 1 OPEN/CLOSE

used to open and close the drive 1 transport tray. NOTE: When a disc is already

loaded in the transport tray, the tray will not open unless the unit is in pause or

cue mode.

25. POWER SWITCH

A red LED directly above the power switch will glow to indicate main power

is active.

analog mono output signal. Use these jacks to send standard audio to a

mixer or receiver. The red colored jack represents the right channel output

and white jack represents the left channels output.

30. DRIVE 2 DIGITAL OUT

Use this connection to create near perfect copies of your disc to a Mini

disc, CD-R, or any other recording device with a digital input.

31. DRIVE 2 AUDIO OUT R & L

analog mono output signal. Use these jacks to send standard audio to a

mixer or receiver. The red colored jack represents the right channel output

and white jack represents the left channels output.

(38)TOTAL REMAIN Indicator

to the time meter. When the total remain indicator is displayed in the

LCD, the time defined will refer to a disc's total remaining time. The time

mode is changed by tapping on time button.

(39)REMAIN Indicator

the remaining time of playing track.

(40)PITCH DISPLAY

changes within a range of +/-4%,+/- 8%,+/-16%.

c d j - m p 3 2

(Transport Tray Open/Close) –This button is

- This switch is used to control the unit's main power.

29 28

- This jack sends a digital stereo out signal.

- These jacks send a left and right

- This indicator is in direct reference

- Indicates that the time shown on the display is

- It shows the BPM change range, the BPM