ClearOne WS840D-M610 Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Sistema microfonico ClearOne WS840D-M610. ClearOne WS840D-M610 13.
Stampa la pagina
Setting Up ClearOne WS8000 Wireless Systems for Optimal Performance
Open the Cartons: Confirm everything on the packing slip is enclosed.
1.
Set up the Docking Station: ClearOne transmitters are shipped with
rechargeable batteries. Plug in the charging dock, put the batteries in
the transmitters, then place the transmitters in the dock while you set
up the rest of the system.
2.
Mount the Receivers in the Rack and connect them to power.
Confirm the displays light up.
3.
Antenna Design:
A.
B.
4.
Connect the Extension Antennas: The receiver that connects to the
extension antennas is the primary receiver. Daisy-chained receivers
will become replica receivers. Terminators are used on the last system
in the daisy-chain. Use ClearOne Remote's Antenna Setup Wizard,
which opens automatically the first time you connect. You can also find
the wizard under the SETTINGS tab of the main page. If connecting
ClearOne active extension antennas, make sure the red LED lights up.
If not, check the receiver's antenna phantom power setting using the
ClearOne Remote Control Software.
5.
Connect the analog outputs to the mixer: The system is shipped with either XLR or Euro
Block connectors. The default output level is set to 0 dBu. Note that factory default for
the front panel headphone jack is set for mixed line-level out. Use ClearOne
Remote>Settings>Headphone, to reset for headphones.
CAUTION! Turn off phantom power from the mixer. Phantom power distorts the audio
quality of your microphones.
6.
System Test: In most cases, the system is now ready to use. Confirm all channels pass
audio perfectly.
2
Place the antennas according to the guidelines mentioned
in the Antenna Applications Guide. Improper antenna
placement is the main cause of poor RF performance.
Dipole Antennas: Dipole antennas mounted to the rack
equipment can easily be locked away in a closet/rack
cabinet. This results in poor RF performance because there
is no line of sight between the transmitter and receiver
antenna. Therefore, remote antennas are preferred.
See the Antenna Application Guide for details.
Primary
Terminators
Replica