ACOUSTIC SOLUTIONS SP150 Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Jukebox ACOUSTIC SOLUTIONS SP150. ACOUSTIC SOLUTIONS SP150 17. Cd/hard drive audio jukebox

Stampa la pagina

TO LOAD A CD TO THE HARD DRIVE

TO LOAD A CD ONTO THE HARD DRIVE

1. As described above when inserting a CD into the SP150

you will see the following screen:

��

2. Using the up/down keys on the remote control (12 and

14), select load and press OK on the remote control (15).

3. The SP150 has an automatic ﬁle compression system

which works in standby mode (see later section for an

explanation on compression on page 14). You are asked a

question 'compress later?'

You will see this screen:

��

Using the yes/no command you can tell the SP150 to

either compress this music, "yes", or do not "no". The

reason for this is some music formats, such as classical

music for instance, are better reproduced when they

are not compressed. Therefore using this command

you can exclude certain CDs from being compressed

automatically.

4. Using the up/down keys on the remote control (12 and

14) toggle between yes and no as required, then press OK

on the remote control (15) to select.

5. You will be asked to select a CD name from the music

title data base stored on the SP150.

6. Use the up/down keys on the remote control to search

through the titles of the stored CD names to locate the

correct title.

10. If the correct CD title is not shown, this will be because

that CD is not stored in the database (see updating

database page 15). In this case choose 'Other' from this

menu and the SP150 will display the tracks as numbers.

The SP150 will automatically name the album, such as

"Album 1", and will number subsequent unknown albums

in sequential order, such as "Album 2, 3, 4" etc.

11. When you have decided on the title of the CD then

press OK (15) to start the ﬁle transfer process.

12. If the CD has been previously copied to the hard drive

you will be asked if you wish to 'overwrite'?. You may wish

to do this if the previous copied CD stored on the hard disc

drive was corrupt in any way.

Using the up/down keys on the remote control (12 and 14)

toggle between yes and no then press OK.

13. The SP150 will overwrite the existing CD if you choose

yes, or return to the ready menu if you choose no.

You will see the following screen when ﬁle transfer is

underway:

��

14. You will see the progression of the ﬁle transfer process

by the percentage ﬁgure of each track, and the particular

track being copied on the second line of the LCD display

Note: The ﬁle transfer process of the SP150 is one

of the fastest on the market. When the SP150 is

new this will be fastest, as the hard drive is empty,

and this transfer rate will slow as the hard drive

becomes fuller.

PREVIEW MODE DURING FILE TRANSFER

As the CD is being copied to the hard drive it is possible

to listen to a preview of each track as is is transferred.

This length of each preview is dependent on the speed of

transfer, but should be between 10-25 seconds of each

track.

1. To turn the preview mode ON, press the preview button

on the remote control (8).

2. Pressing this button repeatedly will toggle between

preview ON and preview OFF.

3. Choose either ON or OFF, and the SP150 will select

this setting after 2-3 seconds, and will then return to the

previous menu.

OTHER FUNCTIONS DURING FILE TRANSFER

Unlike many other hard drive systems, it is possible to

access tracks already stored on the hard drive whilst

recording a new CD to the hard drive.

Please refer to the section "playing music from the hard

drive" for information on these functions.

Note: the ﬁle transfer process will be slower if music

is played from the hard drive during the ﬁle transfer

process.

WHEN FILE TRANSFER IS COMPLETE

When the tracks from the CD have been copied to the hard

drive you will LCD screen displays similar to these:

��

Ready indicates that the SP150 has ﬁnished this opera-

tion and awaits further instructions

��

page 7