1 BY ONE H005 Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Giradischi 1 BY ONE H005. 1 BY ONE H005 14. Belt drive turntable system

Stampa la pagina

Power Management Function

The turntable will automatically go into standby mode after 20 minutes of inactivity.

To resume operation, simply press the power switch off, then press it to the "ON"

position after 1 second.

Turntable Operation

1. After connecting to power, press the power switch to the "ON" position.

2. Remove the stylus protector from the stylus.

3. Place the slip mat on the platter and place a record on the slip

mat. If using 45 RPM records, put the 45 RPM adapter on the center

spindle before placing the record on the platter.

4. Set the 33/45 RPM Selector according to the type of record.

5. Turn the Start/Stop dial to the Start position. The platter will start spinning.

6. Unlock the tonearm clip and set the Lift Lever to the up position.

7. Position the tonearm over the desired location (groove) on the record.

8. Move the tonearm lift lever to the down position to move the tonearm toward the

record. Alternatively, place the needle over the desired location on the record.

9. Carefully lower the tonearm on the record.

10. When you are finished playing the record, raise the tonearm, return it to rest on the

arm clip, and turn the Start/Stop dial to the Stop.

Bluetooth Operation

This turntable has a Bluetooth transmitter to wirelessly send audio to a Bluetooth

speaker.

1. Power on your Bluetooth speaker and ensure it is in pairing mode.

2. Power on the turntable. BT will auto search when the turntable turns on and the BT

LED indicator light will flash.

3. When pairing, the light will flash twice per second and will become solid when

paired successfully.

4. To disconnect pairing, power off the turntable or turn off Bluetooth pairing on your

Bluetooth speaker.

5. This turntable will connect to the nearest Bluetooth speaker. If after 2 minutes no

Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become

inactive and the LED will turn off. If you need to connect again, power off the turntable

and the speaker then power on again.

45RPM Adapter

Bluetooth Indicator

Bluetooth Stauts

Flash

Auto searching and pairing

Solid

Paired successfully

Off

Inactive

NOTE:

1. The initial connection may take longer, usually between 30 to 80 seconds. After a

successful connection, the subsequent connection time will be shortened to 10

seconds. Please be patient and wait.

2. The Stop/Start Dial can only control the operation of the platter. To control music

streaming through Bluetooth, please use the control panel of your media

device.

Recording the Vinyl to Your Computer

Please follow the below steps to set up Audacity to record from the USB audio device.

For more details, please refer to the BRIEF INTRODUCTION OF AUDACITY at https://

manual.audacityteam.org/man/recording_with_usb_turntables.html

1. Download the Audacity software and complete installation

1.1 Ensure your Audacity software is up to date . You can download the current

version from http://www.audacityteam.org/download/

1.2 Follow the instructions to complete installation.

2. Set up Audacity to record from the USB audio device.

2.1 Connect the USB device

Use the supplied USB cable to connect your turntable and your computer. No

extra driver is required.

2.2 System settings needed for Windows and Mac