Altra F18V66L Manuale operativo per i proprietari di casa - Pagina 3
Sfoglia online o scarica il pdf Manuale operativo per i proprietari di casa per Camino da interno Altra F18V66L. Altra F18V66L 7.
Anche per Altra F18V66L: Manuale operativo per i proprietari di casa (19 pagine)
Stampa la pagina
INSTALLATION INSTRUCTION
Position your completed mantel close to its final location. Make sure you can access the back of
the mantel as your electric fireplace appliance will be installed from back.
Using a Phillips head screwdriver, remove the screws and the metal mounting center opening.
Next unpack the electric fireplace appliance carefully. Position the appliance behind the fire-
place with front facing the wood mantel. With the help of an adult assistant, lift the appliance
and gently slide it into the opening in the mantel. Make sure the appliance is centered left and
right in the opening. Be careful when placing appliance and adjusting, bottom of appliance could
scratch the finish of the base/hearth of your fireplace. Re-attach the mounting brackets with the
Phillips head screwdriver, and supplied screws.
DO NOT OVER TIGHTEN. With the help of an
assistant, carefully lift completed unit and place
it with the front facing out in the final location
you have chosen for your fireplace. Make sure
to secure the electrical cord before lifting or
moving completed fireplace. When choosing a
final location, make sure you will have clear
access to grounded electrical outlet.
INSTALLING THE EMBER BEDS
If you purchased the electric fireplace with crystals or pebbles, you should installing the ember
beds before you install the fireplace into the mantel.
You will need one phillips head screw-
driver to complete the following instruc-
tions:
1. Remove the 4 screws on the back left
and right sides of the firebox that hold
the glass front in place.
2. Carefully remove the glass front.
3. Arrange the ember beds along the
inset window ledge at the front of the
electric fireplace.
4. Replace the glass front.
5. Line up the holes on the front with the
holes on the firebox and insert and
tighten 4 screws to hold the glass front
in place.
≥1"
≥1"
（A）
1
3
5
3
≥1.5"
ELECTRIC
FIREPLACE
INSERT
≥1"
（B）
REAR VIEW OF FIREPLACE
2
x4
4
x4
ELECTRIC
FIREPLACE
INSERT
≥1.5"
≥1"