AIMS AIMS Power PE300024230S Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Inverter AIMS AIMS Power PE300024230S. AIMS AIMS Power PE300024230S 6. Dc to ac pure sine wave inverter
Stampa la pagina
11. Troubleshooting tips
Low input DC voltage
No output voltage,
buzzer whistles
continuously
High input DC voltage
Overload
Over temperature
1. The switch is off.
No output voltage
2. Loose connection
1. Measure using true RMS
multimeter.
2. The battery power of RMS
Incorrect output
Multimeter is low.
voltage
3. The input voltage is too
high or too low.
1. Load power is too large, or
the actual power of the
appliance exceeds nominal
power.
Cannot power the
2. T h e s t a r t i n g p o w e r o f
load
appliance is larger than the
rated power(such as motor)
When using with TV
Disturbance
or
audio, there is
snowflake on the
screen or noise from
the audio.
If the unit still doesn't work normally after using all the methods above, it maybe the
internal faults of the circuit. Please call or email your local distributor.
9.
Recharge or replace the battery.
1. Do not use when the battery is
charging.
2. Check the rated voltage of the
battery and make sure that it is in
the allowable range of the input
voltage.
Reduce the load power.
1. Cut off the load and allow to cool for
10 to 30 minutes. Restart after it
reaches normal temperature.
2. The load power is too large. Reduce
the total load power to the range of
rated power.
3. Avoid blocking the vent and improve
the ventilation condition.
4. Reduce the ambient temperature.
1. Turn on the power switch.
2. Check the connections.
1. Use a true RMS multimeter to
measure, such as model FLUKE
177/179.
2. Change the battery of the
multimeter then test again.
3. Try to maintain the input voltage in
the range of rated power.
Reduce the load power, or turn the
appliance on first, then open the
inverter. Use the internal soft-start
circuit of the inverter to buffer the
start.
1. Keep the inverter far from antenna.
2. Use screened antenna.
AIMS Power Warranty Instructions:
This product is designed using the most modern digital technology and under very strict
quality control and testing guide lines. If however you feel this product is not performing
as it should, please contact us:
[email protected] or 001-(775)359-6703 or contact your local distributor.
We will do our best to resolve your concerns. If the product needs repair or
replacement, make sure to keep your receipt/invoice, as that will need to be sent back
along with the package and RA# prepaid to AIMS. You have a full 1 year from date of
purchase warranty.
This warranty is valid world wide with the exception that freight and duty charges
incurred outside the contiguous 48 United States will be prepaid by customer.
Except as provided above, AIMS makes no warranty of any kind, express or implied,
including without limitation the implied warranties of merchantability and fitness for a
particular purpose. In no event shall AIMS be liable for indirect, special or
consequential damages. This warranty only applies to AIMS Power branded products.
All other name brand products are warranted by and according to their respective
manufacturer. Please do not attempt to return non-AIMS Power branded products to
AIMS Power.
For additional products such as:
-
Modified sine wave inverters
-
Pure sine wave inverters
-
Low Frequency Inverters
-
Solar Charge Controllers
-
Micro Grid Tied Inverters
-
Inverter Chargers and Automatic transfer switches
-
Converters AC-DC and DC-DC
-
Custom cut cables
-
Batteries
-
Solar Panels & Racks
Please visit our web site: www.aimscorp.net
To find out where to buy any of our products, you may also e-mail: [email protected]
or call 001-(775)359-6703.
10.