ClearSpan Cedar 12' Wide End Frame Kit with Dutch Door Manuale - Pagina 10

Sfoglia online o scarica il pdf Manuale per Kit serra ClearSpan Cedar 12' Wide End Frame Kit with Dutch Door. ClearSpan Cedar 12' Wide End Frame Kit with Dutch Door 13.

Stampa la pagina
CLEARSPAN
END FRAME KIT
™
4
INSTALL FILM END PANELS (continued)
5. Working from inside the frame, mark a 12"-16" border
along the door jambs. (Consult the diagram below.)
These 12"-16" flaps are wrapped to the inside of the
door frame once the final diagonal cuts are made.
6. Using the diagram below as a guide, cut the end
panel to remove the section that is shaded.
7. Fold flaps to the inside of the door frame and secure
to the jambs by attaching the 102197 U-channel over
the film using Tek screws. See diagrams on this page
and the following page.
ATTENTION: Do not wrap the film around the door
jambs. Consult the diagram to the right.
Remove the dark shaded portion of the end panel
material to create an opening for the door.

END PANEL

Wrap this portion of the end panel to the
inside of the door frame and secure with
U-Channel and Tek screws. See diagram
top right and next page.
Cut the film as needed so it wraps to the
inside of the frame without tearing.
Frame Brace
Diagram above shows the end wall and end panel as seen from inside a similar shelter.
10
12"-16"
Ground Level
Drawings may show a different but similar model.
Header
Cut film along
header as
needed.
Inside View
END PANEL
12"-16"
Frame Brace
Revision date: 05.18.10