ClearSpan 5420CC Manuale di istruzioni - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per Arredamento per esterni ClearSpan 5420CC. ClearSpan 5420CC 12. Poly shelters 36' and 54' wide x 20', 30', 40', 50', 60' long
Stampa la paginaSection B - Rafter Assembly
Step 1: Locate the 8 sections of pipe to make an end rafter. This will include (2) leg extensions, (2)
legs, (2) rafter sections "A", and (2) rafter sections "B", Also locate a 3-way coupler and
(2) cross connectors.
Step 2: Add a cross connector to one side of every "A" pipe section. This will be used to secure the
purlin during frame assembly later on.
Step 3: Start at the coupler and add sections to form a house-shaped arch like the one below laying
flat on the ground. It is essential that you perform this step on level ground or the completed
rafter assembly will be twisted.
Step 4: Repeat the steps above to assemble the other end rafter identical to the first.
Step 5: Repeat the steps above to assemble the inside rafters similar to the first but using a 4-way
coupler at each peak instead of the 3-way couplers used at the ends.
Typical End Rafter Assembly
Page 5