Edgeware Diamond Manuale d'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale d'uso per Utensile elettrico Edgeware Diamond. Edgeware Diamond 17. 2-stage electric knife sharpener
Stampa la paginaMaintenance & Care
There is little maintenance required with your Edgeware electric sharpener. To clean
the exterior housing, unplug the unit from the electrical outlet and simply wipe with a
damp cloth.
•
Do not use a powdered abrasive cleaner to clean sharpener.
•
Portable: To protect against risk of electrical shock do not put any part of
appliance in water or other liquid.
•
Do not use any lubricant or water to clean the abrasive wheel.
•
Do not use a lubricant on any other component.
Periodicaly, the clean out door on the bottom of the sharpener should be opened and
cleaned. Also try to clear any remaining particles from the collection area inside the
housing before replacing the door.
Reversing, Cleaning, or Replacement of Ceramic Stones
The ceramic stones can be reversed or cleaned to refresh their abrasive qualities.
The ceramic darkens with use as the metal filings collect on the working corners of
the triangular blocks. The two stones can be turned on end or rotated to expose an
unused section of the ceramic. After all possible working surfaces of the ceramics are
well used, the ceramics can be cleaned using a scrub brush and common cleansing
kitchen powder. For replacement stones, call Customer Service at 800-221-4156 or
visit Edgeware website at www.edgewareproducts.com/replacementparts.
Consumer Service Information
If you have questions regarding the operation of your Edgeware Electric Knife
Sharpener or need service work on your sharpener, please call our Customer Service
Department at (800) 221-4156, or visit our website, www.edgewareproducts.com, for
additional contact information.
All returns submitted without return authorization must be accompanied with a current
shipping address, telephone contact number or email address, and a brief description
of the problem or damage. Send your sharpener to:
Edgeware
CS Dept. 50060
1700 Sleepy Valley Road
Hot Springs, AR 71901-9017
TROUBLESHOOTING GUIDE
Symptom: The sharpener will not start when initially plugged into electrical socket.
Cause: Sharpener or electrical cord could be damaged or malfunctioning.
Solution: Return your sharpener and receipt to the place of purchase for replacement.
Symptom: Sharpener stops running while in use.
Cause: Sharpener has a built in motor thermostat as a safety feature. It protects
sharpener from overheating if left on accidentally for a long period or if being used
improperly.
Solution: If the thermostat shuts down the motor, unplug the sharpener and wait about
one hour for the motor to cool down, and the sharpener will restart. If motor still will not
re-start, return sharpener to place of purchase.
Symptom: Diamond wheel stops removing metal.
Solution: Diamond Break-In Period – The initial aggressive cutting speed of the
Diamond Sharpening Wheels will slow with use. At the same time, the abrasive finish
will improve. Do not be confused by this break in process because it is normal and
should be expected. The diamond wheels are breaking in, NOT wearing out.
Symptom: Ceramic stones stop sharpening.
Cause: The ceramic stones will lose their sharpening ability over time, thus reducing
their effectiveness.
Solution: Ceramic stones are reversible and can be cleaned. Clean and reverse
stones as shown in Owner's Manual to restore original sharpening capabilities. See
"Reversing, Cleaning, and Replacement of Ceramic Stones" section in this
manual.