Diy Kyoto Wattson Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Strumenti di misura Diy Kyoto Wattson. Diy Kyoto Wattson 13. Energy-saving device

How do I turn wattson off?

To turn the display unit off, press and hold the button down for

a few seconds.

How do I reset wattson?

If you need to reset the display unit for any reason (see Troubleshooting

on page 19), insert a pin into the middle air vent hole above the button.

How do I charge wattson?

To charge wattson plug the charger into the DC socket.

front face

reset button

button

back face

DC socket

Colour display.

The wattson has a lovely system of coloured lights which can change to

reflect the amount of electricity being used at the time.

Low Usage.

A pure blue colour with a gentle breathing behaviour indicates that the

electricity being used is low, maybe just a light or two.

Mid Usage.

If the colour is showing purple and is a little more active, then maybe the

TV or stereo are on.

High Usage.

If the light is bright red and it is very active then a lot of electricity is

being used - one or more high power appliances may be on, such as

kettles, cookers, heaters or tumble dryers.

Special messages.

Wattson also displays the following messages:

OUT OF RANGE Means there is no communication from the transmitter.

LOW SENSOR BATTERY Means the transmittor battery is running low.

LOW MAIN BATTERY Means the wattson display unit battery is low.

Note: when the battery gets within 5 minutes of going dead the

wattson will drop into low power mode.