ClearView PowerBoards PB-TA-006 Manuale di istruzioni per l'installazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Automobile Accessories ClearView PowerBoards PB-TA-006. ClearView PowerBoards PB-TA-006 18. Toyota landcruiser 300 series 2022-current

Stampa la pagina

Fitting Instructions

Step 4

Connecting Power to the motor brackets

4.1 Connect motor wires to corresponding

connectors on motor wire harness.

Passenger side wires are

and Driver side wires are

Route the RM driver-side motor wire

under the vehicle dash and bring across

to the driver-side cabin, then route

through the vehicle floor and connect

wire to the motor connector on the RM

(Right Middle) Bracket Assembly.

NB: Holes for routing can be found

under the floor carpet via a rubber

grommet.

REPEAT above steps for Passenger side

motor wiring.

4.2 Re-insert fuse into positive wire and test motor by opening

and closing vehicle doors, or by using the door switch button.

4.3 Tidy up all electrical wires and cable tie wires to the chassis where possible to minimise

risks of wires getting caught on objects.

You may also apply electrical tape/ to connectors to provide additional protection.

green

/ yellow,

red

/ blue.

clearviewaccessories.com.au

Passenger (left)

side motor wiring

Passenger (right)

side motor wiring

Connector for RM Motor