ClearView HD4112 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Modulatore ClearView HD4112. ClearView HD4112 14. Quad hdmi mpeg2 hd dvbt encoder modulator

2. INSTALLATION

2.1 What's in the Box

One HD4112 Encoder / Modulator

One power cable

2.2 Connection

The HD4112 unit comes standard with 4 x HDMI inputs.

Use a quality 75Ω coaxial cable with "F" connectors from the unit's RF OUT jack to the

distribution system or directly to a television.

Connect the power cord to an appropriately rated AC power outlet.

Once connected to power, the device turns on and it takes about 80 seconds to be

operational. Then the message "Initial Please wait" appears on the display. After 80

seconds the message "CLEARVIEW and the Frequency Out" will be displayed

from RF output 1. Other output channels can be displayed by pressing right or left arrow

buttons.

CLEARVIEW

A06, (177.5MHz)

2.2.1 DEVICE Programming and Setup

Connect an Ethernet cable directly (no Cross Over cable required) to the Ethernet Port

on the rear panel of the encoder and then connect the Ethernet cable to an Ethernet switch

or connect an Ethernet Cable to your PC. The default IP address is 192.168.1.138

Make sure your PC has the same first 3 IP sections, eg. 192.168.1.xx and the 4

from 138.

is different

HD4112 Manual Rev. 2

Manual Rev 1.0