ClearView HD Cube Network Camera Manuale di avvio rapido - Pagina 10

Sfoglia online o scarica il pdf Manuale di avvio rapido per Telecamera IP ClearView HD Cube Network Camera. ClearView HD Cube Network Camera 20.

2 Device Installation

This series camera support two installation modes: wall mount and pendant mount. See Figure 2-1

and Figure 2-2.

Important

Please make sure the installation surface can min support the 3X weight of the camera and the

bracket.

Step 1

Paste the installation positioning map on the installation surface such as wall, ceiling or the wood.

Step 2

Dig holes in the installation surface according to the installation positioning map.

Figure 2-1

Step 3

Insert the expansion bolts from the accessories bag to the holes you just dug. If it is the wood surface

you can skip to the next step.

Step 4

Use the screws from the accessories bag to secure the device firmly.

Step 5

Connect the cable and then boot up the device.

Step 6

Loosen the adjust knob for a little bit, adjust the camera to proper surveillance position according to

your actual requirements.

Step 7

Secure the knob of the bracket to fix the camera.