EdgeWave ePrism 3005 Come iniziare - Pagina 14

Sfoglia online o scarica il pdf Come iniziare per Hardware di rete EdgeWave ePrism 3005. EdgeWave ePrism 3005 16. Eprism email security suite

Stampa la pagina
ePrism Model 3005

Completing the Configuration

If the configuration was started before the ePrism appliance was connected to the network, an error
appeared during configuration. Once the ePrism appliance is connected to the network, the
configuration can be completed.
To complete the configuration
Connect the ePrism appliance to the network.
1.
If needed, power up the ePrism appliance.
2.
Start your web browser
3.
If you did not click Force Save when the configuration error appeared, set up the ethernet port
4.
and add the gateway.
In the Address box, enter the IP address of the ePrism appliance.
5.
Log in to the ePrism appliance dashboard.
6.
Go to the Settings > License tab.
7.
Click Update.
8.
At this point, connection and configuration validation tests begin. After validation, the appliance
downloads software updates and restarts the application.
Configure your brand on the appliance:
9.
•
If this the your first appliance, click Add New Brand and continue to
•
If you already have one or more ePrism appliances, click Join Existing Brand, and continue
to
Joining an Existing

What's Next?

You have completed the ePrism appliance configuration and can now filter email through the
appliance. You can also configure:
•
Content Filters
•
Email Continuity (additional license required)
•
Encryption (additional license required)
See the
System Administrator's Guide
Brand.
for detailed configuration procedures.
Getting Started
Adding a New
Brand.
12