ClearWater OzoneMax OZ-SPA Manuale di installazione e funzionamento - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Apparecchiature di illuminazione ClearWater OzoneMax OZ-SPA. ClearWater OzoneMax OZ-SPA 8. Vacuum-ultraviolet pool ozone systems

Stampa la pagina

• A wire connector is provided on this unit to connect a minimum 12 AWG solid copper conductor between this unit and

any metal equipment, metal enclosures of electrical equipment, metal water pipe, or conduit within five (5) feet (1.5m)

of the unit.

• Follow all applicable electric codes.

• All permanent electrical connections should be performed by a qualified electrician.

• For cord and plug connected units:

"Risk of electric shock. Connect only to properly grounded, grounding type receptacle."

• For cord and plug connected units:

"Do not bury cord."

• For cord and plug connected units:

"Warning – To reduce the risk of electric shock, replace damaged cord immediately."

• If electrically connecting this unit directly to pool controls, ensure the controls are protected by a (G.F.C.I.) Ground Fault

Circuit Interrupter.

• Install at least five (5) feet from wall of pool water using nonmetallic plumbing. Install ozone generator no less than one

(1) foot above the maximum water level to prevent water from contacting electrical equipment.

• Mount the unit so that it is not accessible by anyone in the pool.

• Electric Shock Hazard. Disconnect unit from power source before attempting service.

• WARNING: Short term inhalation of high concentrations of ozone and long term inhalation of low concentrations of

ozone can cause serious harmful physiological effects. Do not inhale ozone gas produced by this device.

• WARNING: UV Light is harmful to eyes and exposed skin. Do not look directly at the Ozone producing bulb used in

this device.

OZ-SPA

Power Box

Indicator

Output

Light

Connector

A. Important Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

When using this electrical equipment, basic safety precautions

should always be followed, including the following:

READ AND FOLLOW ALL INSTRUCTIONS

in this manual before attempting installation.

Install in accordance with the installation instructions.

B. Identifying OzoneMAX components

OZ-VIK

Venturi Injection Kit

4 Piece Molly Set

with #10 Screws

Owners

Manual

Warranty

Card