ClearWater Lights Glenda Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Accessori per moto ClearWater Lights Glenda. ClearWater Lights Glenda 12. Led light kit for bmw k1600gt
Anche per ClearWater Lights Glenda: Manuale di installazione (12 pagine), Manuale di installazione (12 pagine), Manuale di installazione (12 pagine), Manuale di installazione (16 pagine)

Wiring (Overview)

Wire Routing:

• Leave body panels off until the wiring is complete.

• Be sure to route wires so that they cannot become tangled or caught

in either a suspension part or steering part. Check movement of both

steering and suspension before riding the bike.

• It is sometimes helpful to follow existing wire routing.

• Main power from our lights is provided by a CANbus safe harness

assembly. Use this to supply power to the lights. The relay is activated by

using a tap to an accessory power lead.

• Run the red and black power wires directly to the battery. The fuse will

protect the system in the event of a short.

• Use a Posi-twist to connect the green wire from the volume control

knob to the two green wires from the lights (3 wires).

• Use a Posi-twist to connect red from the CANbus to the red wires from

lights and volume control knob (4 wires)

• Use a Posi-twist to connect ground/black wire to black wires from

lights and volume control knob. (4 wires)

• If you are using the high beam feature (recommended), use a Posi-

tap to connect the white wire from the volume control knob to the high

beam headlight hot lead (+). This wire will be on only when the high

beam is illuminated.

Page 4

Page 5