ClearWater Lights Krista Manuale di installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione per Accessori per moto ClearWater Lights Krista. ClearWater Lights Krista 8. Kawasaki concours 1400 led light kit dimmable patent pending
Anche per ClearWater Lights Krista: Manuale di installazione (16 pagine), Manuale di installazione (12 pagine)
Stampa la pagina
Step 4: Mounting The Switch and Dimmer
Mounting The Switch
• Any location can be used for the
switch, be careful not to interfere
with movement of front forks. Refer
to the steps below if you need
assistance.
• On left side of dash there is a round
plastic blanking cover.
• Drill 9/32" hole in center of
blanking cover.
• Insert the flush mount switch
Mounting The Dimmer (Handlebar)
• If possible, the dimmer should
be mounted at an existing fastener
point on the left side of the
handlebar cluster.
If a flush-mounted dimmer was
requested/included in your kit,
mount it next to your switch that
was panel mounted.
Step 5: Wiring
Wire Routing:
• Be sure to route wires so that they cannot become tangled or caught
in either a suspension part or steering part. Check movement of both
steering and suspension before riding the bike.
• It is sometimes helpful to follow existing wire routing.
Electrical:
• Run the red and black power wires directly to the battery. The fuse will
protect the system in the event of a short.
• Locate the power relay box in a safe location. Secure with a zip tie. It is
a good idea to face the relay box with the wires coming out the bottom.
This helps keep everything dry.
(Continued on the next page)
Page 5