ArtFox Beam Wash 19QX Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per DJ ArtFox Beam Wash 19QX. ArtFox Beam Wash 19QX 4.

Stampa la pagina
ATTENTION
!
Ensure the supply voltage consistent with host labeled voltage.
Don't put other electrical power cord connect this equipment power
input and output line.
Before connecting 110-240V AC, please ensure the power switch
socket connected with the ground.
Ensure safety, please choose the power socket of high quality.
This equipment's ground wire is yellow-green color.
Prevent collision when you move or install this equipment.
When the equipment stop working is hot, please touch the equipment after 10
mintues cooling.
Turn off the power before you mounting the equipment.
Maximum operating temperature is 45℃
Please keep at least 0.5 meter distance with the combustibles.
1.3 Installation
1.3 Installation
Horizontal installation：
Fixed the hanging frame in place, adjustable angle.
Hang installation:
Warning: Ensure that the installation site is completely suitable,safety and reliable.
When installing the equipment,keep at least 0.3 meter distance with the
combustibles (decorated things, etc) .
Fix the clamp on the equipment hanger, then fix the equipment in the right place.
Installation place must be able to bear more than ten times of the equipment
weight. Test whether the installation site deformed or not in one hour.
Hanging the equipment in the air, usually use a safety rope, which must be
able to bear more than ten times of the equipment weight.
able to bear more than ten times of the equipment weight.
!
2
2 Operation
2.1 Button operation
A. Function
B. Enter
C. Down
D. Up
E. Liquid Crystal Display
Instructions: Press button A will cycle out of seven different functional effects.
Press B or C button to correct the value. Press D button to enter.
2.2 Display menu
NO.
ENGLIGSH DISPLAY
1
DMX512 ADDRESS 001
2
ADJ RED LIGHT 255
3
3
ADJ GREEN LIGHT 255
ADJ GREEN LIGHT 255
4
ADJ BLUE LIGHT 255
5
ADJ WHITE LIGHT 255
6
SIDE PROGRAM 01
7
ADJUST SPEED 16
8
SET FOCUS
9
TEST MODE
3
INTRODUCTIONS
Press up/down button to adjust the address
code, press enter to save
Press up/down button to adjust red
brightness, press enter to save
Press up/down button to adjust green
brightness, press enter to save
brightness, press enter to save
Press up/down button to adjust blue
brightness, press enter to save
Press up/down button to adjust white
brightness, press enter to save
Press up/down button to select built-in
program, press enter to save
Press up/down button to select built-in
program speed, press enter to save
Press up/down button to set the distance of
focus, press enter to save
Press up/down button to enter sound control
and auto mode