ArtFox ATMIC 3000 Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Riflettore ArtFox ATMIC 3000. ArtFox ATMIC 3000 7.
Stampa la paginaColor of line
Mark
Sign
Remarks
Brown
Live wire
"L"
Blue
Zero curve
"N"
Yellow/Green
Groundwire
Installation
ATMIC 3000 can be installed anywhere.
Holder to be installed before installation, and installed rope Insurance.
Warning: To use a secure attachment
Calibration before installation：
·Lighting installation where at least 10 times more lighting can support the weight of light,
·Lamps from the mounting surface at least 1 meter away from the lighting at least 0.5 meters
away from the surface of any flammable and combustible objects
·At least 0.1 m clearance hole next to the debris within；
·Lamps cannot be within the scope of 1 m was.
Bulb
This section describes the choice of lamp and bulb replacement of the installation and how to
change light bulbs.
ATMIC 3000 over heating protection.
Lamp power setting
ATMIC 3000
provides the level of brightness adjustment device, high brightness strobe
device to provide maximum brightness, low brightness devices reduced by approximately 50%
brightness, lamp life can be extended through the function DIP switch DIP switch 6 to operate,
the function set DIP switch 6 ON is a high-brightness operation, the function of DIP switch 6 set
to OFF is low light operation. As shows:
High brightness settings
Low brightness settings