EDIATec ECW100 Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per GPS EDIATec ECW100. EDIATec ECW100 15. Collision warning unit
Anche per EDIATec ECW100: Manuale di installazione (14 pagine)

Stampa la pagina

4. SD Card

Updating the firmware

Download flight records before updating the firmware, otherwise data might be lost.

Firmware files for SD card updates have the extension .fw and are available on the

EDIAtec webpage (http://www.ediatec.ch/htm/updates.php). Copy the file to the top

level directory, don't use subdirectories.

Don't modify filenames. Delete files with the same extension. To start an update, insert

the card into ECW100 and interrupt power for at least 5 seconds. The update then takes

about 50 seconds. The card may remain in the device after updating and during opera-

tion.

Updating the obstacle database

The obstacle database is chargeable and can be ordered from FLARM Technology GmbH

under the following link:

https://shop.flarm.com/

When ordering the obstacle database, the internal serial number of the ECW100 must be

specified. This number can be found in the flarmdev.csv file on the SD card.

Copy the file .ob2 to the top level directory, don't use sub-directories. Don't modify file-

names. Delete files with the same extension. To start an update, insert the card into

ECW100 and interrupt power for at least 5 seconds. The update then takes several

minutes, depending on the size of the file; progress is shown on the display. The card

may remain in the device after updating and during operation.

Configuring the device

If at power up on the SD card a file named flarmcfg.txt is detected, it will be processed

as configuration commands. The syntax is the same as on the serial data port (see 'Data

Port Specifications' manual on the EDIATec webpage

(http://www.ediatec.ch/htm/technische_daten.php)), except for PFLAC,,ID. This feature

is especially useful for batch configuration or a pilot's individual configuration for shared

aircraft.

For easy configuration, use the free online-tool FlarmCfg

(http://www.segelflug-software.de/flarmcfg/)

the

corresponding

offline-version

(http://www.segelflug-software.de/prod_flarmcfgtool.php),.

Basic data entries and the SD card configuration file can be made with the free EDIATec

ECW100-Tool software (http://www.ediatec.ch/htm/tools.php).

Logger files:

Flight recording automatically starts when the aircraft is moving and ends when the unit

is switched off. Switching off or rebooting the device during the flight results in separate

flight record files. Allow at least 2 minutes (if the interval is 4s, our recommended value)

after landing before you switch off the device else you loose the last part of the flight.

Allow more time after landing if the interval is higher. When the memory is full, the old-

est data is overwritten. Always download you flight data before you update the obstacle

databank or the software.

When switching on ECW100 the last flight will copied on the SD card.

Page 5