AIMS Power PRM1000W12120S Manuale operativo - Pagina 10

Sfoglia online o scarica il pdf Manuale operativo per Inverter AIMS Power PRM1000W12120S. AIMS Power PRM1000W12120S 16. 1u rack

Important

1) Input Terminal (12V, 24V or 48V)

Prior to any connections make sure you match the battery voltage to the inverter input voltage. You will probably notice an arc when

connecting a discharged or new power inverter to your batteries. Make sure to connect battery ( ) to Black and battery ( ) to Red.

Tighten terminals. In case of extreme vibration, go back and verify terminals are tight.

2) Inverter on switch/LED

This is the main unit power switch. When this is turned off, the inverter is off. When turned on, the inverter is on.

This LED always lights up when the power switch is on or this inverter is in operation.

3) Overload protection LED's

This LED should not illuminate unless an error occurs. The error may be temporary, such as an overload. It may also indicate a

permanent failure. If it is lit, try disconnecting all loads, and reset inverter.

4) Inverter

This lamp is on whenever unit is connected to battery and not in city power mode.

Even when inverter on switch is off and no city power is present.

5) City power

This lamp is always turned on when using city power.

6) 120Vac outlet

It is 120Vac power outlet.

This product uses city power as an optional input. Ensure city power is not connected to the output of this inverter

or it will be permanently damaged and may pose a shock or fi re hazard. Refer to the manual for proper installation

and operation

Warning