ARTFOX Lighting Matrix Beam 5.5 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per DJ ARTFOX Lighting Matrix Beam 5.5. ARTFOX Lighting Matrix Beam 5.5 9.

3. Installation

The unit should be mounted via its screw holes on the bracket. Always ensure that the

unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the

structure to which you are attaching the unit is secure and is able to support a weight of 10

times of the unit's weight. Also always use a safety cable that can hold 12 times of the

weight of the unit when installing the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place where is

out of the touch of people and has no one pass by or under it，the range of mounting height

is 0~30 M.

3.1 Fixture Jointing

Firstly, plug L type Hexagon wrench into the hole back of the fixture to fasten and locate

two fixtures so that movement won't happen and jointing become more conveniently;

Secondly, use L type Hexagon wrench to counter-clockwise rotate connection lock to

the end until lock tongue returns back, for direction please see arrow ① showed in figure

1,and the next step, use Hexagon wrench clockwise rotate connection lock to the end, see

arrow ②.

Figure 1

Finished fixture jointing is showed as follows:

4.1 Rear Panel

○

1 Display: To show the various menus and the selected functions

○

2 LED:

DMX

MASTER

SLAVE

SOUND

Flashing

○

3 Button:

To select the programming functions

DOWN

To go backward in the selected functions

To go forward in the selected functions

ENTER

To confirm the selected functions

○

4 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.

○

5 DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.

DMX input present

Master Mode

Slave Mode

Sound activation