Clearwell Mobility Admiral Mk3 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Scooter Clearwell Mobility Admiral Mk3. Clearwell Mobility Admiral Mk3 16.

Stampa la pagina

Troubleshooting

Troubleshooting Guide
This table is a guide to fault finding. The battery gauge indicates the status of the
control system as well as the charge remaining in your battery.
If the battery gauge flashes one or more LED's it indicates that there is a system fault.
No. of LED's
flashing
2
Low battery voltage
3
High battery voltage
5
Solenoid brake trip
6/7
Throttle trip
8
Motor disconnected
9
Possible controller trip
10 + Beep
Free-wheel activated
12
www.clearwellmobility.co.uk
Possible Cause
Solution
The battery needs charging or there is a
bad connection, check the connections to
the battery. If the connections are good,
try charging the battery.
An excessive voltage has been applied to
the system. This is usually caused by a bad
battery connection. Check the battery
connections and check that you are using
the charger supplied with your scooter.
The motor brake has a bad connection,
check the motor brake and motor
connections. Make sure all the system
connections are secure.
A throttle trip is indicated. Make sure
that the throttle is in the neutral position
before switching on the scooter.
The motor has a bad connection. Check all
connections and leads between the motor
and power module. Check the position of
the free-wheel lever.
Check all plugs and sockets.
The free-wheel lever is activated and the
motor brake disengagement mechanism is
operated. Check the position of the free-
wheel lever and select DRIVE. Switch off
and back on again to clear the fault.