Edic 3009AF Manuale d'uso e elenco parti - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso e elenco parti per Ventilatore Edic 3009AF. Edic 3009AF 8. Axial air mover
Stampa la pagina
PERIODIC MAINTENANCE:
Use compressed air or a vacuum to remove lint, etc, from the motor, screen or blower. Do not wet the
motor or the wiring. Do not use a pressure washer to clean the unit.
TROUBLESHOOTING
...MOTOR WON'T RUN
POSSIBLE CAUSE
No power to unit...
Switch not turned on...
Switch is defective...
Defective power cord...
Capacitor is defective...
Fan blade jammed...
Intake or exhaust grill blocked...
Loose wiring...
...MOTOR RUNS BUT BLADE SCRAPES
POSSIBLE CAUSE
Severe jolt has caused motor mount
to bend and fan blade to rub...
...UNIT VIBRATES EXCESSIVELY
POSSIBLE CAUSE
Accumulation of soil on fan blade...
Fan blade has lost balance...
Fan blade has been bent...
Bent motor shaft...
...DOES NOT OPERATE AT ALL SPEEDS
POSSIBLE CAUSE
Switch is defective...
Capacitor is defective...
...UNIT MAKES ABNORMAL SOUNDS
POSSIBLE CAUSE
Defective motor...
Foreign object stuck...
SOLUTION
Plug in the unit; check circuit breaker or fuse.
Turn on the switch.
Call your local distributor for a replacement.
Call you local distributor for a replacement.
Call your local distributor for a replacement.
Turn machine off, remove material jamming blade.
Turn machine off, allow to cool, remove blockage.
Check wiring and tighten as needed.
SOLUTION
Remove motor from housing, then replace or repair bent
motor mount.
SOLUTION
Clean fan blade.
Balance or replace fan blade.
Replace fan blade.
Replace motor.
SOLUTION
Call your local distributor for a replacement.
Call your local distributor for a replacement.
SOLUTION
Call your local distributor for a replacement.
Remove material jamming blade.