EDIC-mini 3D-recorder Istruzioni per l'uso

Sfoglia online o scarica il pdf Istruzioni per l'uso per Registratore vocale EDIC-mini 3D-recorder. EDIC-mini 3D-recorder 3.

Stampa la pagina

Purpose:

EDIC-mini

3D-recorder

memory card slots. The use of digital microphones with a built-in 24-bit audio codec ensures maximum recording quality

in the most difficult conditions, as well as high acoustic sensitivity (up to 18 m) and a wide dynamic range (24-bit). The

presence of markers allows it to confirm the authenticity of the record in court. Recording is carried out onto a microSD

card up to 256GB, which provides up to 1 year of continuous recording.

Main Technical Characteristics of the recorders:

Model Power Supply Size (mm)

Rechargeable

battery

*The parameter of autonomy is specified for Record Mode 8KHz/8 bit, in case of higher sampling rate or bitrate,

autonomy value is lower. Autonomy value considerably depends on the model of microSD in use and can vary to be

higher or lower.

Average current consumption: in record mode (8kHz / 8bit) 5mA (depending on the card), in standby mode 2.5μA

without a card installed.

Operating and storage temperature range ............... 0- + 50C

Operating lifetime ....................................... .3 years

Functions:

1. Stereo recording, 3 microphones

2. 3D record mode. The track of the 3rd microphone is mixed into the first two

3. Voice Activation System (VAS)

4. Timers to start recording at the preset time (4 pcs) (once and daily);

5. Linear and circular recording

6. Digital markers to check record authenticity and prevent unauthorized modification of files; Calendar, time and date

attachment

7. Encryption of the records made

8. Control and indication: buttons and LED;

9. Playing back the recordings using headphones

10. Full functionality while charging

11. 2 slots for memory cards, SD format

mic 1

VD2 VD3 VD4 VD1

PLAY

Card

Operating the Recorder

1. Battery Charging

Before starting make sure the rechargeable battery is charged. Charge the battery if necessary.

Connect the supplied cable to the microUSB port of the Recorder, then connect it to the USB port of the PC, or to any

other USB charger with an output voltage of 5V and a current of at least 500 mA. During charging, the blue LED will be on

(VD4), upon completion the green LED is on (VD2). Full charging takes 3-4 hours. The Recorder can also be used during

charging.

Short Operating Instruction for EDIC-mini 3D-recorder

is a professional stationary stereo recorder. The Recorder features three microphones and two

Weoght

Autonomy

(g)

20х98х98

150

mic 2

REC

mic 3

Card

Signal-to-

Sensitivity

(h)

noise (dB)

(dB)

-80

Sampling rates

Frequency

(kHz)

band (kHz)

8;16;32

0,6-15

Charging

interval

once a year